 |
"RigiFlex" Hose Clamp Pliers - Cable Operated
closeout.com
Weiss (we-MAY28630) "RigiFlex" Hose Clamp Pliers - Cable OperatedFeatures: Pre-set and pre-position cable and jaws for reaching the most difficult to get at hose clamps. Positionable, ""obedient"", flex cable can be bent into shape for reaching around objects. Ratcheting mechanism allows preseting jaw position as well as improved control over jaws duing hose clamp removal and installation operations.
Click For Information |
|
 |
"Slimline" Programmable Refrigerant Charging and Recovery Scale
closeout.com
Weiss (we-TIF9055) "Slimline" Programmable Refrigerant Charging and Recovery ScaleFeatures: Completely portable, battery powered, can be used with all refrigerants. Memory handles 99 different stored values. Three display modes -lbs./oz.; decimal lbs.; kilograms. Very high resolution - 0.2 oz./0.010 lbs./4 grams. 200 lb. or 100 kg capacity.
Click For Information |
|
 |
"True Blue 93642" 2-Ton Hydraulic Service Jack
closeout.com
Weiss (we-HWW93642) "True Blue 93642" 2-Ton Hydraulic Service JackFeatures: Low 3.75"" pick-up height. High height of 20"". Removable one-piece handle. U-joint release mechanism for precise load control. In-line pump provides for the most efficient pumping operation. Cast iron lift arm for heavy duty loads. Automatic valve prevents overloading. Sealed hydraulic pump to protect from contamination. Full swivel rear casters for easy positioning. Flanged side plates increase strength. Made in USA.
Click For Information |
|
 |
.030" Flux Core Mig Welding Wire - 10 Lb. 8" Spool
closeout.com
Weiss (we-MLL113794) .030" Flux Core Mig Welding Wire - 10 Lb. 8" SpoolFeatures:Used for general mig welding on mild steel where gas sheilding is inconvenient (such as outdoors) or unavailable. AWS E71T-GS
Click For Information |
|
 |
1 Gallon Brake Bleeder Tank
closeout.com
Weiss (we-CAL855) 1 Gallon Brake Bleeder TankFeatures: Lightweight, plastic, easy to use. Portable tank fills and bleeds both standard and power brakes in a single operation. Tank is easily pressurized with just a few strokes of the built-in hand pump eliminating the need for the compressor. One (1) gallon capacity. 9.66-ft. of hose included. Features quick disconnect coupler, shut off valve and pressure gauge.
Click For Information |
|
 |
1" Drive Split Beam Torque Wrench
closeout.com
Weiss (we-PREC5D600F) 1" Drive Split Beam Torque WrenchFeatures: The C5D600F has the unique feature of having a removeable ratchet head that that allows the wrench to be broken down and stored in a case that will fit in most truck storage areas with ease.Split-Beam Click Wrenches overcome many of the problems associated with micrometer-style click wrenches in abusive environments. The wrench has few components, and all critical parts are welded together at assembly. There is no need to ""work in"" a C series torque wrench before using it the first time. Nor is it necessary to adjust to the lowest torque setting after use. Setting the tool requires only fingertip force since the adjustment mechanism is not under load. Extremely Accurate-Accurate within 4% of reading from 20% of full scale to full scale. Guaranteed against defect in workmanship and materials for 1 year from the date of delivery providing that they have been used according to instructions. Setting torque on adjustable wrenches is fast and easy because there is no spring tension on the adjustment knob. Torque setting locks on adjustable wrenches for repetitive applications. The wrench length is designed to provide the leverage required for maximum torque applications. The length also provides the needed reach for those-hard-to-get-at places. Plastic molded storage case, calibration certificate, and instructions included.Square Drive: 1"" drive, detacheable ratchet Range: 200-600 lb. ft. Graduations: 10 lb. ft. Overall Length: 48-29/64"" Effective Length: 44-31/32"" Width: 2-3/8"" Head Height (without square): 1-1/4"" Weight: 11.76 lbs. (w/plastic case): 14.18 lbs. Finish: Nickel / Chrome Square Drive Service Kit: R44AR-RK Meets or Exceeds the following Specifications: GGG-W-686C, ANSI B107.14M
Click For Information |
|
 |
1,000 lb. Capacity High Lift Transmission Jack
closeout.com
Weiss (we-OTC1791) 1,000 lb. Capacity High Lift Transmission JackFeatures: Universal mounting head provides wide fore and aft tilt range, making alignment of transmission easier. Additional reach and spread are also provided. Foot pump and pedal release mechanism give precise ease of control when positioning or removing a transmission. Adjustable nylon tie-down strap safely secures load. Two-stage hydraulic cylinder design speeds lifting of transmission into position for installing. Very stable work platform has four swivel casters, enabling jack to be easily maneuuvered under the vehicle. Made in the U.S.A., carries OTC''s unique Lifetime Marathon Warranty.Specifications: Max. load lifting capacity first stage: 1,000 lbs. to 73 1/2"" Minimum height: 36"" Maximum height: 73 1/2"" Maximum forward tilt: 50 Degrees Maximum backward tilt: 38 Degrees Maximum side tilt (either side): 14 Degrees Leg width: 40"" Weight: 118 lbs.
Click For Information |
|
 |
1,500 lb Motorcycle Lift
closeout.com
Weiss (we-OTC1545) 1,500 lb Motorcycle LiftFeatures: 1,500 lb. capacity and 17"" long skids that will lift the largest, widest cruisers. Lowest clearance available, 3-1/2"" at lowest level, with a wide lift range of 3-1/2"" to 16-3/4"". Removable handle provides 360░ access to load. Features also include foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety. Two-year warranty
Click For Information |
|
 |
1,500 Lb. Capacity Easy Roller
closeout.com
Weiss (we-OTC1580) 1,500 Lb. Capacity Easy RollerFeatures: The Stinger No. 1580 Easy Roller provides a technician with a simple and efficient method of moving a disabled vehicle around a shop environment. Just position an Easy Roller at each wheel of a vehicle weighing up to 6,000 lbs., and use the foot pedals to activate the hydraulic lift mechanisms. Within minutes, one individual can easily move the car throughout the garage. The Easy Roller fits tread widths up to 12"", and the four heavy-duty casters can support up to 1,500 lbs. per unit while, at the same time, protecting the shop floor from damage. Four heavy-duty phenolic casters. 1,500 lb. capacity per unit. Hydraulic lift mechanism with locking pin. Fits tread widths up to 12"". Sold individually. Four required per vehicle.
Click For Information |
|
|
1,500 lb. Capacity Underhoist Stand with Foot Pedal
closeout.com
Weiss (we-OTC2016A) 1,500 lb. Capacity Underhoist Stand with Foot PedalFeatures: Foot pedal actuated lifting mechanism. Lifting height of 54-1/4"" to 80-3/4""; saddle measures 5-1/4"" x 1-1/4"".
Click For Information |
|
 |
1-1/16" - 12 Point SuperKrome Fractional Combination Wrench
closeout.com
Weiss (we-SK88234) 1-1/16" - 12 Point SuperKrome Fractional Combination WrenchFeatures: SuperKrome high polish finish
Click For Information |
|
 |
1-1/2" - 12 Point SuperKrome Fractional Combination Wrench
closeout.com
Weiss (we-SK88248) 1-1/2" - 12 Point SuperKrome Fractional Combination WrenchFeatures: SuperKrome high polish finish
Click For Information |
|
 |
1-1/4" - 12 Point SuperKrome Fractional Combination Wrench
closeout.com
Weiss (we-SK88240) 1-1/4" - 12 Point SuperKrome Fractional Combination WrenchFeatures: SuperKrome high polish finish
Click For Information |
|
 |
1-1/8" - 12 Point SuperKrome Fractional Combination Wrench
closeout.com
Weiss (we-SK88236) 1-1/8" - 12 Point SuperKrome Fractional Combination WrenchFeatures: SuperKrome high polish finish
Click For Information |
|
